EVK1100 USB DRIVER

I also had to do some changes in the main application to make it work with the bootloader. LED5 will toggle each time the ComTest Rx task receives a character over the RS port and verifies that the received character is that expected. The Demo Application Demo application hardware setup The demo application includes an interrupt driven UART test where one task transmits characters that are then received by another task. Load the symbol table using the command ‘ sym uc3artosdemo. In addition to a subset of the standard demo application tasks, main. Note that vPortEndScheduler has not been implemented. The Control Panel then acts as a USB host and the user may perform the following tasks using the local man-machine interface:

Uploader: Doujinn
Date Added: 5 March 2017
File Size: 16.10 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 74193
Price: Free* [*Free Regsitration Required]

Special syntax is required if you wish your interrupt service routine to cause a context switch. Use the tree menu to navigate evkk1100 of related pages. This can be ensured by making the first three octets of both IP addresses identical. This provides visual feedback that the demo is running.

In the new command prompt window, enter the command ‘ avr32gdbproxy -finternal 0x,Kb -a extended-remote: A local user is a user that can physically interact with the Control Panel i. A remote user is a user that cannot physically interact with the Control Evk11000 i. A boolean is passed to the macro to indicate whether a context switch is required or not.

  18-1D-P200-B 11 DRIVER

lwIP Embedded TCP/IP example

Several services are built around this core feature to access the logs and maintain the system: This manual is divided into the following sections: As you will notice, it uwb the same evk11000 project provided by Atmel but with the modifications explained in this page to make it work as an SD bootloader. The constants defined in this file can be edited to suit your application. This site required JavaScript to be enabled.

First, it had to place it at the right application start address, to make space for the SD bootloader. The page will automatically update every few ksb.

The content of the EVK board is: Note that vPortEndScheduler has not been implemented. Take care with the power polarity when using the latter! Having programmed the flash, to start the program executing simply enter the command evl1100 run’. To write evk11000 ISR from which a context switch can be performed: In order these new components and drivers get compiled and linked each time the application is builtI had to add some entries in the Project Properties Window: Control Panel user’s toolkit.

If it is not present it jumps to the application start address. Commands can be combined onto a single line. Finally, start the program executing by entering the command ‘ cont ‘.

  LD016 PRINTER DRIVER

Despite it is not necessary these directories can be deleted and removed from the Properties Window I removed them and the bootloader is still working: Configure your AC adaptor polarity switch to match the board’s. The best way to ensure this is to base your application on the provided demo application files. These are the steps I follow to program the bootloader and the application on my board for first time.

An interrupt service routine that does not cause a context switch has no special requirements and can be written as per the compiler documentation.

Open a web browser on the connected computer. Type “show warranty” for details. I created a defines. The makefile provides the same facilities usn those described for the standard demo.

ASF Source Code Documentation

See the Atmel Software Framework for the latest port for the latest chips. Enter the command ‘make’.

Remote users toolkit A remote user is a user that cannot physically interact with the Control Panel i.