Press to select Force Speed. Lift the guide rod, and slide the CCD off the guide rod. When the last screen displays, the original message displays. Carefully lift the card and remove. Page 38 – Selecting an output location Page 39 – Chapter 5: The USB and network jacks cannot operate simultaneously.

Uploader: Jubei
Date Added: 1 January 2016
File Size: 11.84 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 7661
Price: Free* [*Free Regsitration Required]

The toner cartridge snaps into place when correctly installed. The manufacturer is not responsible for safety in the event of use of unauthorized replacement parts.

Make Your Selection

From the Layout tab, select the number of pages per sheet from the Pages Per X3440/x340n/x342n drop— down list. This is a precaution for personal safety and to prevent damage to the MFP.

Parts Packet in the parts description column indicates the part is contained in a parts packet. Scan Troubleshooting Printers and Faxes or Printers.


Pin 4 is ground. Scanner not properly registered Perform scanner registration in diagnostics. Il personale di assistenza autorizzato deve, quindi, adottare le precauzioni necessarie. Close the rear cover. Remove the exit guide assembly.


Lexmark X and Xn MFP XXX Service Manual |

Perform steps 1 and 2. Feed card stock one sheet at a time through the manual feeder.

Lift the guide rod, and slide the CCD off the guide rod. It may be necessary to rotate the gears to mesh with the fuser sccan drive gear.

The MFP does not print after a paper jam has been x340/x340/nx342n. The scanner CCD returns to the home position. Pull on the handle to remove the print cartridge assembly.

Printing Printing a document Load paper. The user settings information is printed. Grasp the rear link with your index fingers and thumb on each side of the shaft, and unsnap the link B from the shaft. Press Stop to clear this message.

Controller card If the voltage on pin 1 x340/x340n/x342h incorrect, replace the controller card. Table Of Contents Contents Chapter 1: Pressing 2 returns you to the Network Menu item.

If the message is displayed after the paper is removed, the exit sensor or controller card might be faulty.

Index loading original documents 36 paper capacity 36 broadcast fax 44 buttons, control panel 20 canceling fax job 50 using Stop button 22 card stock 34 cartridge error 91 cartridge, toner installing 62 ordering 70 recycling 70 redistributing toner 63 removing 61 characters, entering 50 Cleaning Scroll to Test Copy. Remove the sensor and its attached cable. Force the left hinge out of its socket, and relax it above the socket.


Select AutoPrint T30 Log.

Cleaning the scanner glass Slightly dampen a soft, lint—free cloth or paper towel with water. The following diagrams show where the margins for letter and A4 paper need to line up on the flatbed or ADF to determine correct scanner registration.

Repair information XXX Fuser removal 1. The following hints can help you avoid paper jams: The flag should operate freely. Repair information XXX Scanner flatbed cover removal sccan.