Note When separating the Toner Cartridge from the Drum Cartridge, do not tilt the cartridge, otherwise toner may spill. Page Load the documents removed in step 2 back into the tray. Positioning Highly Transparent Originals Place a blank sheet of paper of the same size over the original. Don’t show me this message again. By pressing ‘print’ button you will print only current page. Note Use only the toner that has been manufactured specifically for this machine.
|Date Added:||26 April 2004|
|File Size:||43.84 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Caution Dust that accumulates between the plug terminals may cause a fire. To change the number of copies to be made, remove the paper from the Bypass Tray and then reload it. Configuration Page The list of the printer settings is printed.
The image on the copy is not aligned properly. Check the paper tray that has run out of paper, and then supply paper according to the following procedures. Page 5 Replacing the Drum Cartridge Page of Go. Konica Minolta Di Drivers: Setting The Zoom Ratio ] keys until the desired konicq ratio is specified. Pressing the [Start] key at this time will not immediately start the copy cycle. Attach the drawer cover, and then return the drawer for Tray2 to its original position.
For details on their operation, refer to the pages indicated. The copy has dark specks or spots. Don’t have an account? Grab both sides of the paper, and then carefully pull out the sheet of paper. Move the lever in the direction of the arrow to release the lock.
Page 3 Energy Save Mode Follow the procedure described below to clear the misfed paper.
Konica Minolta Copiers
Note Incorrectly cleaning the Control Panel keys minollta damage them. Attach the Bypass Tray in its original position. Page 64 This will start the copy cycle.
Konica Minolta Di1610 User Manual
This product employs a Class 3b laser diode that emits an invisible laser beam. However, the scanned number of pages in copy are not included. If the optional Paper Feed Cassette is installed, a maximum of copies can be continuously printed.
When The Message “paper Empty” Appears Check the paper tray that has run out of paper, and then supply paper according to the following procedures.
Konica Minolta DIP Toner Cartridges
Paper Displays the currently selected paper tray, paper size and paper type. The maximum power of the laser diode is 15 mW and the wavelength is nm. Use of controls, adjustments or performance of procedures other than those specified in this manual may result in hazardous radiation exposure.
The laser diode and the scanning polygon mirror are incorporated in the print head unit. Precautions For Routine Use Do not touch or scratch the surface of the toner unit developing roller and the PC drum, as poor image quality could result. Contact your service representative.
Components And Their Functions 3. The use of non-shielded cable is likely to result in interference with radio communications and is prohibited under CISPR 22 rules and local rules.
Close the Front Cover.